Rotating Bur Holder

Rotating bur holder stores and organises up to 114 burs and small tools with 2,35 mm shank size. Measures 178 mm (W) x 102 mm (H) and has a center cup to hold small tools such as files, scribes and screwdrivers. Cup dimensions: D = 7 cm and Ø = 7 cm.

Item-No.: 10081

Carbide Burs - 2,35mm Shank - 3-pcs. Kit (Contains: 1 ea. KB32119, KB32719, KB32913)

Ideal for use on soft acrylic, die stone and plaster. They have unique structually aligned tungsten carbide points that last long and do not load quickly, even when plaster is wet. Use the fine grits for general shaping and sanding. The coarse grit is for rapid and aggressive shaping and roughing out work. Maximum speed rating 35.000 RPM for all 2,35 mm shanks.

Carbide Burs - 2,35mm Shank - 7-pcs. Kit (Contains: 1 ea. KB32119, KB32315, KB32519, KB32719, KB32813, KB32913, KB32915) (pic. n/a)

Ideal for use on soft acrylic, die stone and plaster. They have unique structually aligned tungsten carbide points that last long and do not load quickly, even when plaster is wet. Use the fine grits for general shaping and sanding. The coarse grit is for rapid and aggressive shaping and roughing out work. Maximum speed rating 35.000 RPM for all 2,35 mm shanks.

Carbide Burs - 2,35mm Shank - Flame

Ideal for use on soft acrylic, die stone and plaster. They have unique structually aligned tungsten carbide points that last long and do not load quickly, even when plaster is wet. Use the fine grits for general shaping and sanding. The coarse grit is for rapid and aggressive shaping and roughing out work. Maximum speed rating 35.000 RPM for all 2,35 mm shanks.

Carbide Burs - 2,35mm Shank - Taper

Ideal for use on soft acrylic, die stone and plaster. They have unique structually aligned tungsten carbide points that last long and do not load quickly, even when plaster is wet. Use the fine grits for general shaping and sanding. The coarse grit is for rapid and aggressive shaping and roughing out work. Maximum speed rating 35.000 RPM for all 2,35 mm shanks.

Carbide Burs - 2,35mm Shank - Ball

Ideal for use on soft acrylic, die stone and plaster. They have unique structually aligned tungsten carbide points that last long and do not load quickly, even when plaster is wet. Use the fine grits for general shaping and sanding. The coarse grit is for rapid and aggressive shaping and roughing out work. Maximum speed rating 35.000 RPM for all 2,35 mm shanks.

Carbide Burs - 2,35mm Shank - Rotor Saw

Ideal for use on soft acrylic, die stone and plaster. They have unique structually aligned tungsten carbide points that last long and do not load quickly, even when plaster is wet. Use the fine grits for general shaping and sanding. The coarse grit is for rapid and aggressive shaping and roughing out work. Maximum speed rating 35.000 RPM for all 2,35 mm shanks.

Carbide Burs - 2,35mm Shank - Ball Nose

Ideal for use on soft acrylic, die stone and plaster. They have unique structually aligned tungsten carbide points that last long and do not load quickly, even when plaster is wet. Use the fine grits for general shaping and sanding. The coarse grit is for rapid and aggressive shaping and roughing out work. Maximum speed rating 35.000 RPM for all 2,35 mm shanks.

Carbide Burs - 2,35mm Shank - Cylinder

Ideal for use on soft acrylic, die stone and plaster. They have unique structually aligned tungsten carbide points that last long and do not load quickly, even when plaster is wet. Use the fine grits for general shaping and sanding. The coarse grit is for rapid and aggressive shaping and roughing out work. Maximum speed rating 35.000 RPM for all 2,35 mm shanks.

Carbide Burs - 2,35mm Shank - Long Taper

Ideal for use on soft acrylic, die stone and plaster. They have unique structually aligned tungsten carbide points that last long and do not load quickly, even when plaster is  wet. Use the fine grits for general shaping and sanding. The coarse grit is for rapid and aggressive shaping and roughing out work. Maximum speed rating 35.000 RPM for all 2,35 mm shanks.

Carbide Burs - 2,35mm Shank - Bud

Ideal for use on soft acrylic, die stone and plaster. They have unique structually aligned tungsten carbide points that last long and do not load quickly, even when plaster is wet. Use the fine grits for general shaping and sanding. The coarse grit is for rapid and aggressive shaping and roughing out work. Maximum speed rating 35.000 RPM for all 2,35 mm shanks.

Carbide and Hard Metal Burs - with 6mm Shaks to use with Model Trimmers, fine and coarse grits - Taper 15°

Attention:

• Carbide and Hard Metal burs
can be used with most common
Model Trimmers.
• Some Trimmers have Bur
Adapters for 6 and / or 8 mm
shanks. Therefore always
check shank diameter!

Carbide and Hard Metal Burs - with 6mm Shaks to use with Model Trimmers, fine and coarse grits - Taper 15°, fine

Attention:

• Carbide and Hard Metal burs
can be used with most common
Model Trimmers.
• Some Trimmers have Bur
Adapters for 6 and / or 8 mm
shanks. Therefore always
check shank diameter!

Carbide and Hard Metal Burs - with 6mm Shaks to use with Model Trimmers, fine and coarse grits - Taper 5°, smooth end

Attention:

• Carbide and Hard Metal burs
can be used with most common
Model Trimmers.
• Some Trimmers have Bur
Adapters for 6 and / or 8 mm
shanks. Therefore always
check shank diameter!

Carbide and Hard Metal Burs - with 6mm Shaks to use with Model Trimmers, fine and coarse grits - Taper 5°, smooth end

Attention:

• Carbide and Hard Metal burs
can be used with most common
Model Trimmers.
• Some Trimmers have Bur
Adapters for 6 and / or 8 mm
shanks. Therefore always
check shank diameter!

Carbide and Hard Metal Burs - with 6mm Shaks to use with Model Trimmers, fine and coarse grits - Ball Nose, fine

Attention:

• Carbide and Hard Metal burs
can be used with most common
Model Trimmers.
• Some Trimmers have Bur
Adapters for 6 and / or 8 mm
shanks. Therefore always
check shank diameter!

Carbide and Hard Metal Burs - with 6mm Shaks to use with Model Trimmers, fine and coarse grits - Ball Nose, coarse

Attention:

• Carbide and Hard Metal burs
can be used with most common
Model Trimmers.
• Some Trimmers have Bur
Adapters for 6 and / or 8 mm
shanks. Therefore always
check shank diameter!

Carbide and Hard Metal Burs - with 6mm Shaks to use with Model Trimmers, fine and coarse grits - Cylinder, smooth end, fine

Attention:

• Carbide and Hard Metal burs
can be used with most common
Model Trimmers.
• Some Trimmers have Bur
Adapters for 6 and / or 8 mm
shanks. Therefore always
check shank diameter!

Carbide and Hard Metal Burs - with 6mm Shaks to use with Model Trimmers, fine and coarse grits - Cylinder, smooth end, coarse

Attention:
• Carbide and Hard Metal burs
can be used with most common
Model Trimmers.
• Some Trimmers have Bur
Adapters for 6 and / or 8 mm
shanks. Therefore always
check shank diameter!

Carbide and Hard Metal Burs - with 6mm Shaks to use with Model Trimmers, fine and coarse grits - Cylinder, large

Attention:

• Carbide and Hard Metal burs
can be used with most common
Model Trimmers.
• Some Trimmers have Bur
Adapters for 6 and / or 8 mm
shanks. Therefore always
check shank diameter!

Carbide and Hard Metal Burs - with 6mm Shaks to use with Model Trimmers, fine and coarse grits - Cylinder, small

Attention:

• Carbide and Hard Metal burs
can be used with most common
Model Trimmers.
• Some Trimmers have Bur
Adapters for 6 and / or 8 mm
shanks. Therefore always
check shank diameter!

Carbide and Hard Metal Burs - with 6mm Shaks to use with Model Trimmers, fine and coarse grits - Taper

Attention:

• Carbide and Hard Metal burs
can be used with most common
Model Trimmers.
• Some Trimmers have Bur
Adapters for 6 and / or 8 mm
shanks. Therefore always
check shank diameter!